Description of Versatile Paver
1. A paver, also known as paver finisher or asphalt finisher, is an engineering vehicle (engineering equipment) used to lay asphalt on roadways;
2. Be suitable for either soil stabilized cement and lime base material or asphalt concrete;
3. Whole hydraulic drive, central control system, electric control motor, ultrasonic sensor control;
4. With constant speed control, auto steering, self exam fault, color display function;
5. Use wearable material to secure the performance;

Specification of Versatile Paver

Performance
Basic paving width	3000mm
Max. paving width	12500mm
Paving depth	20-320mm
Travel speed	0-3.2km/h
Paving speed	0-16m/min
Flatness	σ≤1.2mm (asphalt) 6mm/3m ruler (stabilized soil)
Crown	-1～3%
Max. theoretical capacity	800t/h
Hopper capacity	14t
Max climb ability	20%
Overall size
Machine length	6314mm
Machine width	3182mm
Machine height	3848mm
Engine
Model	F4AE0684BD1
Cooling Medium	Water cooled
No. Of Cylinders	6 cylinders
Output	169kW
Rated Engine	2300rpm
Fuel tank capacity	345L

Driving system: whole hydraulic drive, engine connect transmission case to drive all pumps for the following items:
1．Traveling devices
2．Feeding devices and auger
3．Screw conveying
4．Tamper and vibrating
5. Lifting screed folding hopper and operate cylinder
Traveling device: two side crawler devices are independent hydraulic drive, controlled by micro computer.
Bearing mode: two crawlers bear the weight of the whole machine, and the patch area of every crawler is 3427×320mm
Parking brake: hydraulic NC disc brake was installed in two planet reducer for parking.
Steering: The traveling clutch is controlled by hydraulic cylinder through potentiometer, so it can rotate with the brake.
Hopper: The capacity is 14 tons and controlled by hydraulic cylinder.
Push roller: It is used to pull the back wheels of the truck.
Conveyor system: There are two conveyors on left and right, through pump, motor, reduction device and chain drive, controlled by supersonic material sensor. 0-115 r/min, setpless speed control. Conveyor system consists of pump motor reduction device and chain supersonic material sensor .
Control software: MC400, S11 controller, 24V DC supplied by two batteries is in charge of the whole circuit.
Canopy: It is consisted of steel tube and cloth.
Automatic leveling units:It has longitudinal and one piece of transverse equipment, Ultrasonic NC multi probe auto leveling unit, imported from USA.
Working devices: Mechanical extended screed, gas heating, bottom use imported steel

1．Screed	basic width	3000mm
	Crown of max paving	-1~3%
2．Double tamper	times	0～1500/min
	Distance	main 5mm
	Subaltern	0.3.6.9.12mm
	Pressure	30MPa
3．Vibrating	frequency	0～50Hz
	Pressure	20MPa
4. screed extension	1.5m	4 pieces
	1 m	2 pieces
	0.5m	2 pieces
	0.25m	2 pieces

Versatile Paver SWAP125H Imported Components
1. Italy IVECO company F4AE0684BD1engine;
2. Micro processor use USA Sauer MC400, S11 controller;
3. Color display use USA Sauer
4. Pump, motor use USA Sauer;
5. Auger reducer use Italy RR;
6. Auto leveling unit use USA TSD;
7. Hydraulic hose use USA Paker;
8. Hydraulic sub component use Germany HYDAC;
9. Central lubrication device use Germany BEKA-MAX;
10. Control switch, connection use Germany.